Sirona® Protect Plus
Product Overview
Sirona Protect Plus is a dual-function liquid concentrate that serves two purposes: it safeguards against stains and scale buildup by suspending minerals that cause staining, and it also clarifies the water with a flocculating agent to maintain its sparkling clarity.
~ Add at start-up and then weekly for best results.
~ Compatible with all sanitizers.
~ Incorporating a built-in flocculant, this product rapidly suspends minerals, clarifying the spa water to ensure clean results, thus enhancing your overall wellness experience.
Initial Dosage: ~ Add 2 fluid ounces of Sirona Spa Care Protect Plus for every 250 gallons of water directly into the spa. If the metal content is high, add 4 fluid ounces.
Maintenance Dosage:
~ Add one fluid ounce of Sirona Spa Care Protect Plus for every 250 gallons of spa water weekly.
Directions:
1.Upon the initial filling of your spa or hot tub, introduce 2 fluid ounces of Sirona Spa Care Protect Plus per 250 gallons of water directly into the spa. In cases of high metal content, increase the amount to 4 fluid ounces for every 250 gallons. Ensure that the water is filtered and circulated for at least one hour before introducing any additional chemicals, to allow Sirona Spa Care Protect Plus ample time to fully react with the water.
2. For ongoing maintenance after the initial fill, add 1 fluid ounce of Sirona Spa Care Protect Plus weekly for every 250 gallons of spa water.
Targeted Water Remedy.
When standard sanitation isn't enough, the Sirona Sirona® Protect Plus provides a specialized, fast-acting treatment to eradicate specific water chemistry threats before they escalate into full blooms.
Concentrated Active Ingredients
Delivers a massive payload of targeted treatment without adding unnecessary filler byproducts to your water.
Rapid Dispersion
Formulated to bind quickly with contaminants in the water column so you see visible improvements within 24 hours.
Protects Expensive Equipment
Proactively stopping algae or sequestering metals prevents catastrophic permanent staining to your plaster pool finish.
Common Questions & Instructions
Should I add this while the pump is off?
No, targeted chemicals require thorough circulation. Keep your pump running for at least 12-24 hours after application.
Can I swim immediately after dosing?
We generally recommend waiting at least 2-4 hours after adding specialty chemicals, or until the entire volume of pool water has turned over once.
