Revive Start Up/Clean Up

~ Safe for use with all types of pool surfaces and equipment.

~ Helps you maintain healthy and clear water throughout the pool season by removing contaminants.

Dosage:

~ Initially, pour 32 oz per 24,000 gallons of water.

~  For a clean-up, attach a garden hose to your Revive bottle spray nozzle and spray the entire contents.

Directions: Start-up:

1. Start by removing the spray applicator.

2. As you begin filling the pool with water, pour Revive directly into the deep end at a rate of 32 ounces for every 24,000 gallons of water.

~ This allows Revive to treat both the pool surfaces and the incoming water as the level increases.

3. Once the pool is completely filled, proceed to brush and vacuum any debris that has settled at the bottom.

5. After this, you can move on to your regular water care routine.

Directions: Cleanup:

1. Before applying Revive, if algae is present, scrub the pool walls and perform a shock treatment.

~ It's ideal to circulate the water for about 60 minutes for optimum results.

2. Then, turn off the pump and filter system.

3. Using a garden hose, attach it to the Revive bottle and evenly spray the entire contents across the pool's surface, which should take around 5 to 7 minutes.

4. Allow a period of 24 to 48 hours for the debris to settle at the bottom of the pool before proceeding to slowly vacuum it out as waste. Once the vacuuming is complete, run the filter continuously for 24 hours.